配置BGP最大字首功能

下載選項

  • PDF     (424.4 KB)
    在多種裝置上使用 Adobe Reader 檢視
  • ePub     (82.2 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上的各種應用程式中檢視
  • Mobi (Kindle)     (76.7 KB)
    在 Kindle 裝置或多部裝置的 Kindle 應用程式上檢視
已更新: 2023 年 12 月 15 日
文件 ID:25160

無偏見用語

本產品的文件集力求使用無偏見用語。針對本文件集的目的，無偏見係定義為未根據年齡、身心障礙、性別、種族身分、民族身分、性別傾向、社會經濟地位及交織性表示歧視的用語。由於本產品軟體使用者介面中硬式編碼的語言、根據 RFP 文件使用的語言，或引用第三方產品的語言，因此本文件中可能會出現例外狀況。深入瞭解思科如何使用包容性用語。

關於此翻譯

思科已使用電腦和人工技術翻譯本文件，讓全世界的使用者能夠以自己的語言理解支援內容。請注意，即使是最佳機器翻譯，也不如專業譯者翻譯的內容準確。Cisco Systems, Inc. 對這些翻譯的準確度概不負責，並建議一律查看原始英文文件（提供連結）。

    簡介

    本檔案介紹邊界閘道通訊協定(BGP) Maximum-Prefix功能的設定和疑難排解資訊。

    必要條件

    需求

    思科建議您瞭解以下主題：

    採用元件

    本檔案中的資訊不限於特定軟體和硬體版本，但其輸出取自以下軟體版本：

    • 思科IOS®軟體版本12.2(27)

    本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除（預設）的組態來啟動。如果您的網路運作中，請確保您瞭解任何指令可能造成的影響。

    慣例

    如需文件慣例的詳細資訊，請參閱思科技術提示慣例。

    背景資訊

    本檔案提供有關邊界閘道通訊協定(BGP) Maximum-Prefix功能的組態和疑難排解資訊。

    BGP Maximum-Prefix功能允許您控制可以從鄰居接收的字首數量。預設情況下，此功能允許路由器在來自對等體的接收字首數超過配置的最大字首限制時關閉對等體。此功能通常用於外部BGP對等體，但也可應用於內部BGP對等體。

    當遠端對等站點的出站策略發生變化時，路由器開始接收超過路由器記憶體可容納的路由時，最大字首功能很有用。如果同一台路由器與BGP對等，並且也在網路中執行關鍵路由功能，則此開銷可能會變壞。BGP問題可能會中斷內部網路連線。使用 neighbor maximum-prefix命令，可以保護路由器以避免出現此種情況。

    當您計畫使用此功能時，請考慮以下要點：

    • 瞭解遠端BGP對等路由器通常傳送多少路由。

    • 設定一個略高於正常操作期間預期接收的BGP字首數的閾值。

    • 知道在遠端BGP對等體傳送的字首多於預期的字首時要採取的操作。可採取的操作可以是：在使用clear ip bgp x.x.x.x命令之前關閉會話並降低BGP鄰居關係，或者僅記錄警告消息。

    附註圖示

    注意：Cisco IOS軟體版本12.0(22)S和12.2(15)T已引入此功能的增強功能。此增強功能可讓使用者自動重新建立因超過設定的最大首碼限制而關閉的對等作業階段。啟用此功能時，無需網路操作員干預。有關詳細資訊，請參閱BGP在超出最大字首限制後重新啟動會話。

    設定

    本節提供用於設定本文件中所述功能的資訊。

    用於配置BGP最大字首功能的命令語法為：

    neighbor {ip-address | peer-group-name} maximum-prefix <maximum> [threshold] [restart restart-interval] [warning-only]

    其中：

    • maximum -表示允許從鄰居接收的最大字首數。

    • threshold -一個可選整數值，用於指定配置的maximum-value百分比。路由器開始生成警告消息。範圍為1至100%，預設值為75%。

      例如，如果配置的maximum-value為20且閾值為60，則當來自鄰居的BGP獲知的路由數超過20 (12)條路由的60%時，路由器將生成警告消息。

      restart-interval -重新建立對等會話的可選時間間隔（分鐘）。範圍為1至65535分鐘。

      warning-only -（可選）當超出最大字首限制時，允許路由器生成日誌消息，而不是終止對等會話。

    為了更好地說明用法，請考慮以下示例：

    neighbor 10.1.1.1 maximum-prefix 3000

!--- Drops the peering to 10.1.1.1 when 
!--- more than 3000 prefixes are received.


neighbor 10.1.1.1 maximum-prefix 3000 warning-only

!--- Logs a warning message when the peer sends 
!--- more than 3000 prefixes.


neighbor 10.1.1.1 maximum-prefix 3000 50

!--- Logs a warning message at 1500 and drops the 
!--- peering when over 3000 prefixes are sent.


neighbor 10.1.1.1 maximum-prefix 3000 50 warning-only

!--- Initially warns at 1500 and re-warns 
!--- (different message) at 3000 prefixes received. 
!--- However, the BGP Peer is not disconnected.

    網路圖表

    此文件使用以下網路設定：

    bgp-maximum-prefix-01.gif

    組態

    本檔案使用下列組態：

    當閾值超過設定的閾值時，為僅警告消息配置的最大字首

    在Maximum-Prefix warning-only配置中，Router_B配置為當從Router_A收到的字首數超出所設定的閾值時僅記錄警告消息。兩個路由器的配置如下表所示。請注意，neighbor命令配置了warning-only關鍵字。

    Router_A Router_B 
    hostname Router_A
! 
interface Loopback0
 ip address 10.0.0.1 255.255.255.255
!
interface Serial0 
 ip address 192.168.1.1 255.255.255.252
!
interface Serial1
 ip unnumbered Loopback0 
! 
router bgp 200
 no synchronization
 bgp router-id 10.0.0.1
 bgp log-neighbor-changes
 neighbor 192.168.1.2 local-as 100
 neighbor 10.0.0.2 remote-as 300
 neighbor 10.0.0.2 ebgp-multihop 2
 neighbor 10.0.0.2 update-source Loopback0
 neighbor 10.0.0.2 version 4
 no auto-summary
!
ip route 10.0.0.2 255.255.255.252 Serial1
    		 
    hostname Router_B 
!
interface Loopback0
 ip address 10.0.0.2 255.255.255.252
!
interface Ethernet0 
 ip address 10.0.1.1 255.255.255.0 
!
interface Serial0
 ip unnumbered Loopback0
! 
router bgp 300
 no synchronization
 bgp router-id 10.0.0.2
 bgp log-neighbor-changes
 neighbor 10.0.0.1 remote-as 200
 neighbor 10.0.0.1 ebgp-multihop 2
 neighbor 10.0.0.1 update-source Loopback0
 neighbor 10.0.0.1 version 4
 neighbor 10.0.0.1 maximum-prefix 10 80 warning-only

!--- Enables warning message logging when the number 
!--- of BGP routes learned from neighbor 
!--- 10.0.0.1 exceeds eight. 

 no auto-summary
!
ip route 10.0.0.1 255.255.255.252 Serial0

    本文檔的驗證與故障排除部分中的show和debug命令輸出報告了當從Router_A收到的字首數超出所設定的閾值時，Router_B上所發生的實際情況。

    最大字首配置為在閾值超過設定的閾值時關閉鄰居關係

    在配置為關閉鄰居關係配置的Maximum-Prefix中，Router_B配置為在從Router_A收到的字首數超出所設定的閾值時生成警告消息。Router_B也設定為超過最大首碼限制時關閉BGP鄰居。兩台路由器的配置如表所示。請注意，neighbor命令未設定warning-only關鍵字。

    Router_A Router_B 
    hostname Router_A
! 
interface Loopback0
 ip address 10.0.0.1 255.255.255.255
!
interface Serial0 
 ip address 192.168.1.1 255.255.255.252
!
interface Serial1
 ip unnumbered Loopback0 
! 
router bgp 200
 no synchronization
 bgp router-id 10.0.0.1
 bgp log-neighbor-changes
 neighbor 192.168.1.2 local-as 100
 neighbor 10.0.0.2 remote-as 300
 neighbor 10.0.0.2 ebgp-multihop 2
 neighbor 10.0.0.2 update-source Loopback0
 neighbor 10.0.0.2 version 4
 no auto-summary
!
ip route 10.0.0.2 255.255.255.252 Serial1
    		 
    hostname Router_B 
!
interface Loopback0
 ip address 10.0.0.2 255.255.255.252
!
interface Ethernet0 
 ip address 10.0.1.1 255.255.255.0 
!
interface Serial0
 ip unnumbered Loopback0
! 
router bgp 300
 no synchronization
 bgp router-id 10.0.0.2
 bgp log-neighbor-changes
 neighbor 10.0.0.1 remote-as 200
 neighbor 10.0.0.1 ebgp-multihop 2
 neighbor 10.0.0.1 update-source Loopback0
 neighbor 10.0.0.1 version 4
 neighbor 10.0.0.1 maximum-prefix 10 80

!--- This forces the neighbor session to tear down 
!--- when the BGP learned routes from 
!--- the neighbor exceeds 10.

 no auto-summary
!
ip route 10.0.0.1 255.255.255.252 Serial0

    「驗證與故障排除」部分中的show和debug命令輸出報告了當從Router_A收到的字首數超出所設定的閾值時，Router_B上所發生的實際情況。

    驗證與疑難排解

    本節提供的資訊可用於確認組態是否正常運作。

    本文檔使用的功能的命令語法和預設值摘自BGP命令頁。

    附註圖示

    注意：使用debug命令之前，請參閱瞭解有關Debug命令的重要資訊。

    Maximum-Prefix Warning-Only

    請注意以下數字：

    • 同意的最大字首數：10

    • 警告閾值：80% (8)

    只要接收的字首數量不超過設定的閾值(8)，就不會記錄任何消息。從鄰居10.0.0.1獲知的BGP路由數一旦超過閾值限制8，Router_B就會記錄此消息。傳送九個首碼時會模擬此情況：

    %BGP-4-MAXPFX: No. of prefix received from 10.0.0.1 (afi 0) reaches 9, max 10

    如果情況變得更糟，並且超過Maximum-Prefix number set 10，則路由器將記錄此消息。傳送12個首碼時會模擬此情況：

    %BGP-3-MAXPFXEXCEED: No. of prefix received from 10.0.0.1 (afi 0): 11 exceed limit 10

    啟用debug ip bgp updates in之後，您可以更仔細地檢視所發生的情況。但是，請勿在具有數千個字首的即時環境中使用此命令。描述的情況是Router_B已建立對等關係。Router_A已向Router B通告了六個字首。現在，對等體Router_A通告了另外三個字首。

    Router_B# debug ip bgp updates in
*Mar 12 07:31:18.944: BGP(0): 10.0.0.1 rcvd UPDATE w/ attr: nexthop 10.0.0.1, origin i, metric 0, path 200
*Mar 12 07:31:18.948: BGP(0): 10.0.0.1 rcvd 10.0.1.0/24...duplicate ignored
*Mar 12 07:31:18.952: BGP(0): 10.0.0.1 rcvd 10.0.2.0/24...duplicate ignored
*Mar 12 07:31:18.960: BGP(0): 10.0.0.1 rcvd 10.0.3.0/24...duplicate ignored
*Mar 12 07:32:20.224: BGP(0): 10.0.0.1 rcvd 10.0.4.0/24...duplicate ignored
*Mar 12 07:32:20.228: BGP(0): 10.0.0.1 rcvd 10.0.5.0/24...duplicate ignored
*Mar 12 07:32:20.232: BGP(0): 10.0.0.1 rcvd 10.0.6.0/24...duplicate ignored
*Mar 12 07:34:19.768: BGP(0): 10.0.0.1 rcvd 10.0.7.0/24
*Mar 12 07:34:19.772: BGP(0): 10.0.0.1 rcvd 10.0.8.0/24
*Mar 12 07:34:19.780: BGP(0): 10.0.0.1 rcvd 10.0.9.0/24
*Mar 12 07:34:19.780: 
%BGP-4-MAXPFX: No. of prefix received from 10.0.0.1 (afi 0 ) reaches 9, max 10

*Mar 12 07:34:19.792: BGP(0): Revise route installing 1 of 1 route for 10.0.7.0/24 -> 10.0.0.1 to main IP table
*Mar 12 07:34:19.796: BGP(0): Revise route installing 1 of 1 route for 10.0.8.0/24 -> 10.0.0.1 to main IP table
*Mar 12 07:34:19.804: BGP(0): Revise route installing 1 of 1 route for 10.0.9.0/24 -> 10.0.0.1 to main IP table

    Router_B#show ip bgp neighbor 10.0.0.1
BGP neighbor is 10.0.0.1,  remote AS 200, external link
  BGP version 4, remote router ID 10.0.0.1
  BGP state = Established, up for 00:13:22
  Last read 00:00:21, hold time is 180, keepalive interval is 60 seconds
  Neighbor capabilities:
    Route refresh: advertised and received(old & new)
    Address family IPv4 Unicast: advertised and received
    IPv4 MPLS Label capability:
  Received 930 messages, 0 notifications, 0 in queue
  Sent 919 messages, 1 notifications, 0 in queue
  Default minimum time between advertisement runs is 30 seconds

 For address family: IPv4 Unicast
  BGP table version 30, neighbor version 30
  Index 1, Offset 0, Mask 0x2
  Route refresh request: received 0, sent 0
  9 accepted prefixes consume 432 bytes
  Prefix advertised 0, suppressed 0, withdrawn 0, maximum limit 10 (warning-only)
  Threshold for warning message 80%

  Connections established 2; dropped 1
  Last reset 00:29:13, due to BGP Notification sent, update malformed
  Message received that caused BGP to send a Notification:
    FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
    003C0200 00001940 01010040 02040201
    00C84003 040A0000 01800404 00000000
    180A000A 180A000B 180A000C
  External BGP neighbor can be up to 2 hops away.
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 10.0.0.2, Local port: 15668
Foreign host: 10.0.0.1, Foreign port: 179

Enqueued packets for retransmit: 0, input: 0  mis-ordered: 0 (0 bytes)

Event Timers (current time is 0x3A46EB54):
Timer          Starts    Wakeups            Next
Retrans            18          0             0x0
TimeWait            0          0             0x0
AckHold            22          9             0x0
SendWnd             0          0             0x0
KeepAlive           0          0             0x0
GiveUp              0          0             0x0
PmtuAger            0          0             0x0
DeadWait            0          0             0x0

iss: 2047376434  snduna: 2047376784  sndnxt: 2047376784     sndwnd:  16035
irs:  821061364  rcvnxt:  821062116  rcvwnd:      16188  delrcvwnd:    196

SRTT: 279 ms, RTTO: 500 ms, RTV: 221 ms, KRTT: 0 ms
minRTT: 24 ms, maxRTT: 384 ms, ACK hold: 200 ms
Flags: higher precedence, nagle

Datagrams (max data segment is 536 bytes):
Rcvd: 33 (out of order: 0), with data: 22, total data bytes: 751
Sent: 29 (retransmit: 0, fastretransmit: 0), with data: 17, total data bytes: 349

    Router_B#show ip bgp summary
BGP router identifier 10.0.0.2, local AS number 300
BGP table version is 30, main routing table version 30
9 network entries and 9 paths using 1341 bytes of memory
1 BGP path attribute entries using 60 bytes of memory
1 BGP AS-PATH entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP activity 36/101 prefixes, 36/27 paths, scan interval 60 secs

Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
10.0.0.1        4   200     932     921       30    0    0 00:15:08        9

    假設情況變得更糟，並且Router_A傳送了另外三個字首，這將使總數增加到12。

    Router_B# debug ip bgp updates in
*Mar 12 07:39:21.192: BGP(0): 10.0.0.1 rcvd UPDATE w/ attr: nexthop 10.0.0.1, origin i, metric 0, path 200
*Mar 12 07:39:21.196: BGP(0): 10.0.0.1 rcvd 10.0.10.0/24
*Mar 12 07:39:21.200: %BGP-4-MAXPFX: No. of prefix received from 10.0.0.1 (afi 0) reaches 10, max 10
*Mar 12 07:39:21.208: BGP(0): 10.0.0.1 rcvd 10.0.11.0/24
*Mar 12 07:39:21.212: %BGP-3-MAXPFXEXCEED: No. of prefix received from 10.0.0.1 (afi 0): 11 exceed limit 10
*Mar 12 07:39:21.216: BGP(0): 10.0.0.1 rcvd 10.0.12.0/24
*Mar 12 07:39:21.228: BGP(0): Revise route installing 1 of 1 route for 10.0.10.0/24 -> 10.0.0.1 to main IP table
*Mar 12 07:39:21.236: BGP(0): Revise route installing 1 of 1 route for 10.0.11.0/24 -> 10.0.0.1 to main IP table
*Mar 12 07:39:21.240: BGP(0): Revise route installing 1 of 1 route for 10.0.12.0/24 -> 10.0.0.1 to main IP table

    Router_B# show ip bgp neighbors 10.0.0.1
BGP neighbor is 10.0.0.1,  remote AS 200, external link
  BGP version 4, remote router ID 10.0.0.1
  BGP state = Established, up for 00:19:56
  Last read 00:00:56, hold time is 180, keepalive interval is 60 seconds
  Neighbor capabilities:
    Route refresh: advertised and received(old & new)
    Address family IPv4 Unicast: advertised and received
    IPv4 MPLS Label capability:
  Received 937 messages, 0 notifications, 0 in queue
  Sent 925 messages, 1 notifications, 0 in queue
  Default minimum time between advertisement runs is 30 seconds

 For address family: IPv4 Unicast
  BGP table version 33, neighbor version 33
  Index 1, Offset 0, Mask 0x2
  Route refresh request: received 0, sent 0
  12 accepted prefixes consume 576 bytes
  Prefix advertised 0, suppressed 0, withdrawn 0, maximum limit 10 (warning-only)
  Threshold for warning message 80%

  Connections established 2; dropped 1
  Last reset 00:35:47, due to BGP Notification sent, update malformed
  Message received that caused BGP to send a Notification:
    FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
    003C0200 00001940 01010040 02040201
    00C84003 040A0000 01800404 00000000
    180A000A 180A000B 180A000C
  External BGP neighbor can be up to 2 hops away.
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 10.0.0.2, Local port: 15668
Foreign host: 10.0.0.1, Foreign port: 179

Enqueued packets for retransmit: 0, input: 0  mis-ordered: 0 (0 bytes)

Event Timers (current time is 0x3A4CEA98):
Timer          Starts    Wakeups            Next
Retrans            24          0             0x0
TimeWait            0          0             0x0
AckHold            29         16             0x0
SendWnd             0          0             0x0
KeepAlive           0          0             0x0
GiveUp              0          0             0x0
PmtuAger            0          0             0x0
DeadWait            0          0             0x0

iss: 2047376434  snduna: 2047376898  sndnxt: 2047376898     sndwnd:  15921
irs:  821061364  rcvnxt:  821062290  rcvwnd:      16014  delrcvwnd:    370

SRTT: 290 ms, RTTO: 376 ms, RTV: 86 ms, KRTT: 0 ms
minRTT: 24 ms, maxRTT: 384 ms, ACK hold: 200 ms
Flags: higher precedence, nagle

Datagrams (max data segment is 536 bytes):
Rcvd: 40 (out of order: 0), with data: 29, total data bytes: 925
Sent: 42 (retransmit: 0, fastretransmit: 0), with data: 23, total data bytes: 463

    Router_B#show ip bgp summary
BGP router identifier 10.0.0.2, local AS number 300
BGP table version is 33, main routing table version 33
12 network entries and 12 paths using 1788 bytes of memory
1 BGP path attribute entries using 60 bytes of memory
1 BGP AS-PATH entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP activity 39/101 prefixes, 39/27 paths, scan interval 60 secs

Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
10.0.0.1        4   200     939     927       33    0    0 00:21:28       12

    從顯示的示例中可以看到，即使鄰居路由器傳送的字首超過策略允許的數量，BGP鄰居關係也會得到維護。結果是Router_B僅記錄一條警告消息。Router_B不會執行其他動作。

    Maximum-Prefix配置為在閾值超過設定的閾值時關閉會話

    此情況所需的初始條件是BGP鄰居啟動並運行，並且有6個字首由Router_A傳送到Router_B。如示例中所示，當Router_A通告更多字首（例如9）時，命令的輸出準確地反映了Router_B配置為只記錄警告消息時的已知情況。如果增加傳送的字首數量，並使Router_A通告12，則Router_B會關閉與Router_A的鄰居關係。

    Router_B#debug ip bgp updates in
*Mar 12 08:03:27.864: BGP(0): 10.0.0.1 rcvd UPDATE w/ attr: nexthop 10.0.0.1, origin i, metric 0, path 200
*Mar 12 08:03:27.868: BGP(0): 10.0.0.1 rcvd 10.0.1.0/24...duplicate ignored
*Mar 12 08:03:27.876: BGP(0): 10.0.0.1 rcvd 10.0.2.0/24...duplicate ignored
*Mar 12 08:03:27.880: BGP(0): 10.0.0.1 rcvd 10.0.3.0/24...duplicate ignored
*Mar 12 08:03:27.884: BGP(0): 10.0.0.1 rcvd 10.0.4.0/24...duplicate ignored
*Mar 12 08:03:27.892: BGP(0): 10.0.0.1 rcvd 10.0.5.0/24...duplicate ignored
*Mar 12 08:03:27.896: BGP(0): 10.0.0.1 rcvd 10.0.6.0/24...duplicate ignored
*Mar 12 08:03:27.900: BGP(0): 10.0.0.1 rcvd 10.0.7.0/24
*Mar 12 08:03:27.908: BGP(0): 10.0.0.1 rcvd 10.0.8.0/24
*Mar 12 08:03:27.912: BGP(0): 10.0.0.1 rcvd 10.0.9.0/24
*Mar 12 08:03:27.916: %BGP-4-MAXPFX: No. of prefix received from 10.0.0.1 (afi 0) reaches 9, max 10
*Mar 12 08:03:27.924: BGP(0): 10.0.0.1 rcvd 10.0.10.0/24
*Mar 12 08:03:27.932: BGP(0): 10.0.0.1 rcvd 10.0.11.0/24
*Mar 12 08:03:27.932: %BGP-3-MAXPFXEXCEED: No. of prefix received from 10.0.0.1 (afi 0): 11 exceed limit 10
*Mar 12 08:03:27.940: %BGP-5-ADJCHANGE: neighbor 10.0.0.1 Down BGP Notification sent
*Mar 12 08:03:27.940: %BGP-3-NOTIFICATION: sent to neighbor 10.0.0.1 3/1 (update
 malformed) 0 bytes  FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 0060 0200 0000 1940
 0101 0040 0204 0201 00C8 4003 040A 0000 0180 0404 0000 0000 180A 0001 180A 0002
 180A 0003 180A 0004 180A 0005 180A 0006 180A 0007 180A 0008 180A 0009 180A 000A
 180A 000B 180A 000C
*Mar 12 08:03:28.024: BGP(0): Revise route installing 1 of 1 route for 10.0.7.0/24 -> 10.0.0.1 to main IP table
*Mar 12 08:03:28.032: BGP(0): Revise route installing 1 of 1 route for 10.0.8.0/24 -> 10.0.0.1 to main IP table
*Mar 12 08:03:28.036: BGP(0): Revise route installing 1 of 1 route for 10.0.9.0/24 -> 10.0.0.1 to main IP table
*Mar 12 08:03:28.044: BGP(0): Revise route installing 1 of 1 route for 10.0.10.0/24 -> 10.0.0.1 to main IP table
*Mar 12 08:03:28.148: BGP(0): no valid path for 10.0.1.0/24
*Mar 12 08:03:28.152: BGP(0): no valid path for 10.0.2.0/24
*Mar 12 08:03:28.156: BGP(0): no valid path for 10.0.3.0/24
*Mar 12 08:03:28.156: BGP(0): no valid path for 10.0.4.0/24
*Mar 12 08:03:28.160: BGP(0): no valid path for 10.0.5.0/24
*Mar 12 08:03:28.164: BGP(0): no valid path for 10.0.6.0/24
*Mar 12 08:03:28.168: BGP(0): no valid path for 10.0.7.0/24
*Mar 12 08:03:28.168: BGP(0): no valid path for 10.0.8.0/24
*Mar 12 08:03:28.172: BGP(0): no valid path for 10.0.9.0/24
*Mar 12 08:03:28.176: BGP(0): no valid path for 10.0.10.0/24
*Mar 12 08:03:28.184: BGP(0): nettable_walker 10.0.1.0/24 no best path
*Mar 12 08:03:28.188: BGP(0): nettable_walker 10.0.2.0/24 no best path
*Mar 12 08:03:28.192: BGP(0): nettable_walker 10.0.3.0/24 no best path
*Mar 12 08:03:28.196: BGP(0): nettable_walker 10.0.4.0/24 no best path
*Mar 12 08:03:28.200: BGP(0): nettable_walker 10.0.5.0/24 no best path
*Mar 12 08:03:28.204: BGP(0): nettable_walker 10.0.6.0/24 no best path
*Mar 12 08:03:28.208: BGP(0): nettable_walker 10.0.7.0/24 no best path
*Mar 12 08:03:28.212: BGP(0): nettable_walker 10.0.8.0/24 no best path
*Mar 12 08:03:28.212: BGP(0): nettable_walker 10.0.9.0/24 no best path
*Mar 12 08:03:28.216: BGP(0): nettable_walker 10.0.10.0/24 no best path
    Router_B# show ip bgp summary
BGP router identifier 10.0.0.2, local AS number 300
BGP table version is 87, main routing table version 87

Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
10.0.0.1        4   200     965     948        0    0    0 00:02:24 Idle (PfxCt)

    Router_B# show ip bgp neighbors 10.0.0.1
BGP neighbor is 10.0.0.1,  remote AS 200, external link
  BGP version 4, remote router ID 0.0.0.0
  BGP state = Idle
  Last read 00:02:43, hold time is 180, keepalive interval is 60 seconds
  Received 965 messages, 0 notifications, 0 in queue
  Sent 948 messages, 2 notifications, 0 in queue
  Default minimum time between advertisement runs is 30 seconds

 For address family: IPv4 Unicast
  BGP table version 87, neighbor version 0
  Index 1, Offset 0, Mask 0x2
  Route refresh request: received 0, sent 0, maximum limit 10
  Threshold for warning message 80%

  Connections established 2; dropped 2
  Last reset 00:02:43, due to BGP Notification sent, update malformed
  Message received that caused BGP to send a Notification:
    FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
    00600200 00001940 01010040 02040201
    00C84003 040A0000 01800404 00000000
    180A0001 180A0002 180A0003 180A0004
    180A0005 180A0006 180A0007 180A0008
    180A0009 180A000A 180A000B 180A000C

  Peer had exceeded the max. no. of prefixes configured.
  Reduce the no. of prefix and clear ip bgp 10.0.0.1 to restore peering
  External BGP neighbor can be up to 2 hops away.
  No active TCP connection
    附註圖示

    注意：使用此命令可以恢復對等體功能：

    Router_B#clear ip bgp 10.0.0.1

    相關資訊

    修訂記錄

    修訂 發佈日期 意見
    1.0
    09-Jul-2002
    初始版本
    TAC Authored

    由思科工程師貢獻

    這份文件是否有所幫助？

    Feedback意見

    讓思科協助您